Wax CERA – colourless waterbased tintable finishing wax. To be used for surfaces decorated by plasters of RILAKDEKOR series. CERA deposits semitransparent film accentuating relief and contrast of surface structure. Base EC can be used colourless (untinted) as such for sealing of dry АТАСАМА surface, or tinted by COLTEC WOOD catalog.
CERA has to be evenly applied by brush or woollen glove on to 1÷2 m2 surface area units using multidirectional or circular movements. Drying time of CERA wax at +20ºС – 1-2 h. Application can be conducted at air and surface temperature above +10ºC and relative humidity below 85%. To provide high degree of washability it is recommended to seal the surface by transparent varnish of required degree of gloss (EKOAKVA, LUOTEN or PANEĻU LAKA are recommended). Painting tools after work has been completed can be cleaned off by warm water with soap. Wax has to be stored at tightly closed pails at temperature above +5ºC.
Wax CERA – colourless waterbased tintable finishing wax. To be used for surfaces decorated by plasters of RILAKDEKOR series. CERA deposits semitransparent film accentuating relief and contrast of surface structure. Base EC can be used colourless (untinted) as such for sealing of dry АТАСАМА surface, or tinted by COLTEC WOOD catalog.
CERA has to be evenly applied by brush or woollen glove on to 1÷2 m2 surface area units using multidirectional or circular movements. Drying time of CERA wax at +20ºС – 1-2 h. Application can be conducted at air and surface temperature above +10ºC and relative humidity below 85%. To provide high degree of washability it is recommended to seal the surface by transparent varnish of required degree of gloss (EKOAKVA, LUOTEN or PANEĻU LAKA are recommended). Painting tools after work has been completed can be cleaned off by warm water with soap. Wax has to be stored at tightly closed pails at temperature above +5ºC.
