Concentrated liquid antiseptic for treatment of mineral and wood surfaces. Can be used for disinfection of mineral surfaces (plaster, concrete, etc.) and untreated wood products usable indoors and outdoors before painting them. Can also be used in premises with increased humidity. Cleans the surfaces to be treated from mould, various other fungi and algae. Non-professional users may also work with this product.

Before starting work, all food products and animal feed must be removed from the premises to be treated. The product should be diluted with water in the ratio: 1 volume part of AKVASEPT mixed with 2 parts of water. Heavily contaminated surfaces should be mechanically cleaned, followed by washing to a clean surface with detergents. Use a ceiling/wall (maklovitsa) brush or regular paint brush to apply the diluted AKVASEPT solution. Apply so as to achieve the deepest possible permeation of the solution into the surface. After drying for 20 minutes, re-apply at least 2 more coats of the diluted solution, again with approximately 20 minute drying intervals. When treating highly porous materials and wood, the drying time may increase depending on the structure of the surface treated. Recommended temperature for outdoor work: not less than +10 °C. Subsequent impregnation, priming or painting of the surface may be performed indoors not earlier than after 24 hours; outdoors – not earlier than after 48 hours. The consumption of the working solution is 2 to 3 m²/l when applied in 3 coats depending on the type of surface. Use water to wash work tools. Children and pets are allowed to stay in the treated premises only after the treated surface has dried completely. Store in a tightly closed container at a temperature not lower than 0 °C, away from food products and animal feed.