This enamel is intended for painting wooden and concrete floors in interiors. Available in yellow brown, light brown, reddish brown, grey, green and beige.

Concrete should be homogeneous and ideally should not contain modifying additives (polymer dispersions, curing accelerators, hydrophobic additives, etc.). These additives can adversely affect the adhesion of the enamel to the base (concrete). Therefore, if the exact composition of the concrete base is not known, it is necessary to perform a test painting on a small spot with a subsequent mechanical adhesion test. The absolute humidity of the concrete must not exceed 4%. New concrete surfaces may be painted not earlier than after 28 days. Lime milk should be removed from these surfaces (see instructions for preparing concrete floors for painting). Stir thoroughly before use; if necessary, dilute with white spirit or VAITSOL solvent, up to 8% by volume. The enamel is applied to clean, dry floors with a paint brush or roller in 2 to 3 coats. Drying time for each coat at 20 ± 2 °C: 24 hours. Consumption: 6 to 9 m²/l for each coat.