RIALKID quick-drying, gloss, water-soluble alkyd enamel. Intended for painting wood and primed metal surfaces. Base A can be used in white or tinted in light shades; Base C can be tinted in dark tones.
Use GF-021, NOVAKOR, NEOSPRINT PRIMER or RIATOP PRIMER primers for priming outdoor steel surfaces; use VL-02 or NEOSPRINT PRIMER primers for priming aluminium and galvanized surfaces. It is recommended to prime outdoor wood surfaces first with colourless TEKSTURDEKOR paint for wood protection. Stir the enamel thoroughly before use and dilute with water to working viscosity if necessary. Apply the enamel in 1–2 coats with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The air and paintable surface temperature must not be below +10 °C; air relative humidity – not higher than 70%. Drying time of each coat at +20 ºC is 6 hours, at +10 ºC – 8 hours. Drying time between applications at +20 ºC is not less than 8 hours, at +10 ºC – not less than 12 hours. Data on primer consumption for obtaining different coating thicknesses (excluding losses during application) are shown in the table. Use water to wash work tools. Store between +5 ºC and +30 ºC.
RIALKID quick-drying, gloss, water-soluble alkyd enamel. Intended for painting wood and primed metal surfaces. Base A can be used in white or tinted in light shades; Base C can be tinted in dark tones.
Use GF-021, NOVAKOR, NEOSPRINT PRIMER or RIATOP PRIMER primers for priming outdoor steel surfaces; use VL-02 or NEOSPRINT PRIMER primers for priming aluminium and galvanized surfaces. It is recommended to prime outdoor wood surfaces first with colourless TEKSTURDEKOR paint for wood protection. Stir the enamel thoroughly before use and dilute with water to working viscosity if necessary. Apply the enamel in 1–2 coats with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The air and paintable surface temperature must not be below +10 °C; air relative humidity – not higher than 70%. Drying time of each coat at +20 ºC is 6 hours, at +10 ºC – 8 hours. Drying time between applications at +20 ºC is not less than 8 hours, at +10 ºC – not less than 12 hours. Data on primer consumption for obtaining different coating thicknesses (excluding losses during application) are shown in the table. Use water to wash work tools. Store between +5 ºC and +30 ºC.
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
