RIATOP semi-matt is a weather-resistant quick-drying alkyd enamel. Intended for painting primed metal roofs, façades, structures, equipment, vehicles (except passenger cars) and other objects outdoors. The enamel can be tinted in both TEMACOLOR SCALA and RILAKOLOR systems. Base A (TAL) can be used as white enamel or tinted in light shades; Base C (TDL) can be tinted in dark tones.
Use RIATOP PRIMER for priming steel surfaces. Use VL-02 primer for priming aluminium and galvanized surfaces. Stir the enamel thoroughly before use. Dilute to working viscosity with xylene or SOLVEKS SPRINT solvent if necessary. The air and paintable surface temperature should not be below +5 ºC during application. Air relative humidity – not higher than 85%. Apply in 1–2 coats on clean dry surfaces with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The drying and curing time until application of the next coats is shown in Table 1. The consumption of enamel depending on the thickness of the coating is shown in Table 2.
Table 1
Air and paintable surface temperature | When tinting in the TEMACOLOR SCALA system | When tinting in the RILAKOLOR system | ||||||
| Drying time, hours | Curing time until application of the next coat of enamel, hours | Drying time, hours | Curing time until application of the next coat of enamel, hours | |||||
until no sticking | until complete drying | not less than | not more than | until no sticking | until complete drying | not less than | not more than | |
+10 ºC | 1.5 | 5 | 1 | 18 * | 1.5 | 6.5 | 1 | 18 ** |
| +20 ºC | 1 | 3 | 1 | 6 * | 1 | 4.5 | 1 | 6 ** |
* if the 2nd coat has not been applied within the specified time after the first coat, then it may only be applied 7 days
after the application of the previous coat.
** if the 2nd coat has not been applied within the specified time after the first coat, then it may only be applied 9 days
after the application of the previous coat.
Table 2
Thickness, μm | The number of coats required to achieve the specified coating thickness | Consumption of enamel excluding losses during application m²/l | |
dry film | wet layer (without dilution with solvents) | ||
40 | 90 | 1 | 11.1 |
| 60 | 135 | 1 | 7.4 |
RIATOP semi-matt is a weather-resistant quick-drying alkyd enamel. Intended for painting primed metal roofs, façades, structures, equipment, vehicles (except passenger cars) and other objects outdoors. The enamel can be tinted in both TEMACOLOR SCALA and RILAKOLOR systems. Base A (TAL) can be used as white enamel or tinted in light shades; Base C (TDL) can be tinted in dark tones.
Use RIATOP PRIMER for priming steel surfaces. Use VL-02 primer for priming aluminium and galvanized surfaces. Stir the enamel thoroughly before use. Dilute to working viscosity with xylene or SOLVEKS SPRINT solvent if necessary. The air and paintable surface temperature should not be below +5 ºC during application. Air relative humidity – not higher than 85%. Apply in 1–2 coats on clean dry surfaces with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The drying and curing time until application of the next coats is shown in Table 1. The consumption of enamel depending on the thickness of the coating is shown in Table 2.
Table 1
Air and paintable surface temperature | When tinting in the TEMACOLOR SCALA system | When tinting in the RILAKOLOR system | ||||||
| Drying time, hours | Curing time until application of the next coat of enamel, hours | Drying time, hours | Curing time until application of the next coat of enamel, hours | |||||
until no sticking | until complete drying | not less than | not more than | until no sticking | until complete drying | not less than | not more than | |
+10 ºC | 1.5 | 5 | 1 | 18 * | 1.5 | 6.5 | 1 | 18 ** |
| +20 ºC | 1 | 3 | 1 | 6 * | 1 | 4.5 | 1 | 6 ** |
* if the 2nd coat has not been applied within the specified time after the first coat, then it may only be applied 7 days
after the application of the previous coat.
** if the 2nd coat has not been applied within the specified time after the first coat, then it may only be applied 9 days
after the application of the previous coat.
Table 2
Thickness, μm | The number of coats required to achieve the specified coating thickness | Consumption of enamel excluding losses during application m²/l | |
dry film | wet layer (without dilution with solvents) | ||
40 | 90 | 1 | 11.1 |
| 60 | 135 | 1 | 7.4 |
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
