Decorative plaster retrieving imagination about patterns and landscapes born by the Nature (weathered stone surface, mountainous valley from bird eye view etc.). Very unique and eyecatching look of VALLE makes it ideally suitable for decorating of interiors in various ethnic and rustic styles. VALLE forms elastic crackbridging coat capable to mask various surface imperfections and requires just minimal surface preparation.
Prior to plastering surface has to be coated by KVARC primer. Recreating of relief structure. VALLE has to be applied by rectangular or trapezoidal trowel in criss-cross or wave like manner keeping light pressure on to the tool. Too rough areas can subsequently be smoothened by brush. Developing of structure by means of application of tinted CERA wax. CERA has to be evenly applied by brush or woollen glove on to 1-2 m2 surface area units using multidirectional or circular movements. Application can be conducted at air and surface temperature above +10°C and relative humidity below 85%. Drying time of VALLE at +20°С – 24-36 h depending on relief thickness . Spreading rate: 0,8-1,0 m2/kg. While CERA is still wet surface has to be worked by woollen glove again in order to ensure uniform wax distribution all over the surface. To provide high degree of washability it is recommended to seal the surface by transparent varnish of required degree of gloss (Ekoakva, Luoten or Paneļu laka are recommended). Varnishing of surface helps also to reveal contrast of the structure. In case pearlescent sparkling effect is desired it is also possible (optional) to admix pearlescent powder PERLIUM of required colour directly to the lacquer prior to its application. Painting tools after work has been completed can be cleaned off by warm water with soap. Paint has to be stored at tightly closed pails at temperature above +5°C.
Decorative plaster retrieving imagination about patterns and landscapes born by the Nature (weathered stone surface, mountainous valley from bird eye view etc.). Very unique and eyecatching look of VALLE makes it ideally suitable for decorating of interiors in various ethnic and rustic styles. VALLE forms elastic crackbridging coat capable to mask various surface imperfections and requires just minimal surface preparation.
Prior to plastering surface has to be coated by KVARC primer. Recreating of relief structure. VALLE has to be applied by rectangular or trapezoidal trowel in criss-cross or wave like manner keeping light pressure on to the tool. Too rough areas can subsequently be smoothened by brush. Developing of structure by means of application of tinted CERA wax. CERA has to be evenly applied by brush or woollen glove on to 1-2 m2 surface area units using multidirectional or circular movements. Application can be conducted at air and surface temperature above +10°C and relative humidity below 85%. Drying time of VALLE at +20°С – 24-36 h depending on relief thickness . Spreading rate: 0,8-1,0 m2/kg. While CERA is still wet surface has to be worked by woollen glove again in order to ensure uniform wax distribution all over the surface. To provide high degree of washability it is recommended to seal the surface by transparent varnish of required degree of gloss (Ekoakva, Luoten or Paneļu laka are recommended). Varnishing of surface helps also to reveal contrast of the structure. In case pearlescent sparkling effect is desired it is also possible (optional) to admix pearlescent powder PERLIUM of required colour directly to the lacquer prior to its application. Painting tools after work has been completed can be cleaned off by warm water with soap. Paint has to be stored at tightly closed pails at temperature above +5°C.
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
