Classic polishing Venetian lime based stucco capable to replicate structure of polished natural stone (marble, travertine, onyx, malachite etc.). Depth of structure recreated by sequential applications of thin and almost translucent layers in cope with big variety of available colours make possible imitation of antique stone walls with very high level of realism. VENETO CLASSICO suits very well for decoration of interiors either in classical or modern styles. For VENETO CLASSICO application it is necessary to use special polishing inox trowel with rounded edges and corners.
For VENETO CLASSICO application it is necessary to use special polishing inox trowel with rounded edges and corners. VENETO CLASSICO can be applied on to smooth solid and clean mineral surfaces (mortars, renders, concrete, gypsum boards etc.). Prior to application of VENETO CLASSICO surface has to be coated by KVARC primer. Application can be conducted at air and surface temperature +10-30°C and relative humidity below 85%. First (1 or 2) coats have to be applied by INOX trowel. Avoid formation of excessively rough patterns. Drying time of each coat – 3 hours. Intercoat interval is 6 hours- minimum (at 20°C). Spreading rate: 0,7-0,9 kg/m2 for 1 and 2 coats. Final coat has to be applied on to small area (0,5-1,0 m2) by short multidirectional creative pressing movements holding trowel at acute angle to surface. To obtain more variegated pattern it is also possible to use special polishing triangle spatula with rounded corners in criss-cross manner. It is advisable to provide complete coverage of surface by very thin layer of stucco. Right away while material is still wet polishing procedure has to be commenced. Polishing procedure has to be accomplished while final coat is still wet. Trowel has to be kept at acute angle to the surface. Pressing force should increase after each stroke. As a result of repeating multidirectional “pressing movements” gloss level is gradually increasing after each stroke. Spreading rate: 0,2-0,3 kg/m2 for final coat Finishing wax VENETO CERA has to be evenly distributed all over the surface by multidirectional movements of INOX trowel. Trowel has to be kept at acute angle to surface. After wax is dried surface has to be polished by soft cloth or woollen glove by circular movements. Please bear in mind that primary role of stucco (even despite it protected by wax) is not protective but only decorative. Therefore high mechanical or washing loads on to decorated surface are to be avoided. Cleaning and dedusting of the surface has to be done using dry or just lightly moisturized soft cleaning cloth. Paint has to be stored at tightly closed pails at temperature above +5°C.
Classic polishing Venetian lime based stucco capable to replicate structure of polished natural stone (marble, travertine, onyx, malachite etc.). Depth of structure recreated by sequential applications of thin and almost translucent layers in cope with big variety of available colours make possible imitation of antique stone walls with very high level of realism. VENETO CLASSICO suits very well for decoration of interiors either in classical or modern styles. For VENETO CLASSICO application it is necessary to use special polishing inox trowel with rounded edges and corners.
For VENETO CLASSICO application it is necessary to use special polishing inox trowel with rounded edges and corners. VENETO CLASSICO can be applied on to smooth solid and clean mineral surfaces (mortars, renders, concrete, gypsum boards etc.). Prior to application of VENETO CLASSICO surface has to be coated by KVARC primer. Application can be conducted at air and surface temperature +10-30°C and relative humidity below 85%. First (1 or 2) coats have to be applied by INOX trowel. Avoid formation of excessively rough patterns. Drying time of each coat – 3 hours. Intercoat interval is 6 hours- minimum (at 20°C). Spreading rate: 0,7-0,9 kg/m2 for 1 and 2 coats. Final coat has to be applied on to small area (0,5-1,0 m2) by short multidirectional creative pressing movements holding trowel at acute angle to surface. To obtain more variegated pattern it is also possible to use special polishing triangle spatula with rounded corners in criss-cross manner. It is advisable to provide complete coverage of surface by very thin layer of stucco. Right away while material is still wet polishing procedure has to be commenced. Polishing procedure has to be accomplished while final coat is still wet. Trowel has to be kept at acute angle to the surface. Pressing force should increase after each stroke. As a result of repeating multidirectional “pressing movements” gloss level is gradually increasing after each stroke. Spreading rate: 0,2-0,3 kg/m2 for final coat Finishing wax VENETO CERA has to be evenly distributed all over the surface by multidirectional movements of INOX trowel. Trowel has to be kept at acute angle to surface. After wax is dried surface has to be polished by soft cloth or woollen glove by circular movements. Please bear in mind that primary role of stucco (even despite it protected by wax) is not protective but only decorative. Therefore high mechanical or washing loads on to decorated surface are to be avoided. Cleaning and dedusting of the surface has to be done using dry or just lightly moisturized soft cleaning cloth. Paint has to be stored at tightly closed pails at temperature above +5°C.
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
